Pemanfaatan IoT untuk Efisiensi Energi pada Pabrik Pintar: Tantangan, Solusi dan Tren Teknologi

Penulis

  • Ewin Suciana Universitas Yarsi Pratama
  • Muhammad Hudzaifah Nasrullah Universitas Yarsi Pratama
  • Duta Arief Christanto Universitas Yarsi Pratama
  • Dede Cahyadi Universitas Yarsi Pratama
  • Lilik Tiara Giantri Universitas Yarsi Pratama

DOI:

https://doi.org/10.54914/jtt.v11i1.1897

Kata Kunci:

Efisiensi energi, IoT, kerangka PRISMA, pabrik pintar, SLR

Abstrak

Penelitian ini mengkaji peran Internet of Things dalam meningkatkan efisiensi energi pada pabrik pintar dengan menganalisis tren, faktor pendorong, dan tantangan terkini. Metode yang digunakan adalah Systematic Literature Review dengan kerangka kerja PRISMA untuk memastikan seleksi studi yang sistematis dan terpadu. Penerapan kerangka PICO dalam perumusan pertanyaan penelitian memandu penyaringan data dari database Scopus dengan kriteria inklusi dan eksklusi ketat. Hasil menunjukkan peningkatan signifikan dalam publikasi penelitian IoT untuk efisiensi energi di pabrik pintar selama tahun 2019-2025. Tantangan utama meliputi konsumsi energi sensor yang tinggi, keandalan komunikasi, serta kompleksitas manajemen jaringan. Keterbatasan penelitian terkait penggunaan sumber data yang terbatas pada database Scopus dan publikasi berbahasa Inggris. Penelitian ini menekankan perlunya pendekatan interdisipliner dan teknologi canggih seperti 5G dan edge computing untuk mengatasi isu integrasi serta keamanan data guna mendukung implementasi IoT yang efektif dan berkelanjutan di sektor manufaktur.

Unduhan

Data unduhan belum tersedia.

Referensi

D. Wang, D. Zhong, and A. Souri, “Energy management solutions in the Internet of Things applications: Technical analysis and new research directions,” Cogn. Syst. Res., vol. 67, pp. 33–49, 2021, doi: 10.1016/j.cogsys.2020.12.009.

F. S. Tesch da Silva, C. A. da Costa, C. D. Paredes Crovato, and R. da Rosa Righi, “Looking at energy through the lens of Industry 4.0: A systematic literature review of concerns and challenges,” Comput. Ind. Eng., vol. 143, 2020, doi: 10.1016/j.cie.2020.106426.

H. Yadav, U. Soni, and G. Kumar, “Analysing challenges to smart waste management for a sustainable circular economy in developing countries: a fuzzy DEMATEL study,” Smart Sustain. Built Environ., vol. 12, no. 2, pp. 361–384, 2023, doi: 10.1108/SASBE-06-2021-0097.

S. C. Vetrivel, T. P. Saravanan, and R. Maheswari, “Smart factories and energy efficiency in industry 4.0,” in Distributed Time-Sensitive Systems, 2025, pp. 63–103. doi: 10.1002/9781394197798.ch4.

D. H. Wi, H. J. Kwon, J. K. Park, S. J. Kang, and J. D. Lee, “Opportunistic and location-based collaboration architecture among mobile assets and fixed manufacturing processes,” Sens. Switz., vol. 18, no. 8, 2018, doi: 10.3390/s18082703.

K. Musaeva, I. Vyachina, and M. Aliyeva, “Smart factories and their impact on modern manufacturing enterprises: Prospects and challenges in the era of the digital economy,” presented at the E3S Web of Conferences, 2024. doi: 10.1051/e3sconf/202453707010.

K. Dhondge, R. Shorey, and J. Tew, “HOLA: Heuristic and opportunistic link selection algorithm for energy efficiency in Industrial Internet of Things (IIoT) systems,” presented at the 2016 8th International Conference on Communication Systems and Networks, COMSNETS 2016, 2016. doi: 10.1109/COMSNETS.2016.7439960.

M. Soori, B. Arezoo, and R. Dastres, “Internet of things for smart factories in industry 4.0, a review,” Internet Things Cyber-Phys. Syst., vol. 3, pp. 192–204, 2023, doi: 10.1016/j.iotcps.2023.04.006.

A. H. Bagdadee, L. Zhang, and M. Saddam Hossain Remus, “A Brief Review of the IoT-Based Energy Management System in the Smart Industry,” presented at the Advances in Intelligent Systems and Computing, 2020, pp. 443–459. doi: 10.1007/978-981-15-0199-9_38.

R. Lee, S. H. Park, and J. G. Park, “Key success factors of business performance: Evidence from smart factories in South Korea,” J. Theor. Appl. Inf. Technol., vol. 10, no. 19, pp. 3291–3301, 2020.

V. Mishra and M. P. Mishra, “Prisma for review of management literature – method, merits, and limitations – an academic review,” Rev. Manag. Lit., vol. 2, pp. 125–136, 2023, doi: 10.1108/S2754-586520230000002007.

M. J. Page, D. Moher, S. Brennan, and J. E. McKenzie, “The PRISMATIC project: protocol for a research programme on novel methods to improve reporting and peer review of systematic reviews of health evidence,” Syst. Rev., vol. 12, no. 1, 2023, doi: 10.1186/s13643-023-02363-6.

R. J. Posso, L. C. Barba, R. A. Tenorio, R. Caicedo-Quiroz, G. Maqueira-Caraballo, and J. Barzola-Monteses, “PRISMA Guidelines: Methodological Adaptation for Systematic Reviews in Education,” Data Metadata, vol. 4, 2025, doi: 10.56294/DM2025698.

M. Višić, “CONNECTING PUZZLE PIECES: SYSTEMATIC LITERATURE REVIEW METHOD IN THE SOCIAL SCIENCES,” Sociologija, vol. 64, no. 4, p. 543, 2022, doi: 10.2298/SOC2204543V.

M. I. Riaño-Casallas and S. Rojas-Berrio, “How to Report Systematic Literature Reviews in Management Using SyReMa,” Innovar, vol. 34, no. 92, 2023, doi: 10.15446/innovar.v34n92.99156.

R. van Dinter, C. Catal, and B. Tekinerdogan, “A Multi-Channel Convolutional Neural Network approach to automate the citation screening process,” Appl. Soft Comput., vol. 112, 2021, doi: 10.1016/j.asoc.2021.107765.

A. R. Ramadhani, M. A. Fauzi, M. M. Abdullah, S. S. Maesaroh, dan O. Herdiana, "Pengaruh Pemasaran Media Sosial terhadap Keterlibatan Pelanggan (Survei pada Pengguna Halodoc di Indonesia)," *Jurnal Teknologi Terpadu*, vol. 9, no. 1, pp. 65–69, 2023.

K. Harry and M. Alrezq, “Assessment of Critical Success Factors Using Meta-synthesis Evaluation,” presented at the IISE Annual Conference and Expo 2022, 2022. [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85137172797&partnerID=40&md5=142e9a05d15585cd8118051d0379fba3

M. Stark and B. Woods, “Developing an Idea into a Research Question,” Clin. Spine Surg., vol. 36, no. 1, pp. 34–36, 2023, doi: 10.1097/BSD.0000000000001393.

E. Faridmoayer, A. Badami, A. Schwartzman, and F. C. Brunicardi, “What problem are you solving?,” in Handbook for Designing and Conducting Clinical and Translational Surgery, 2023, pp. 25–27. doi: 10.1016/B978-0-323-90300-4.00085-9.

H. Scells, G. Zuccon, B. Koopman, A. Deacon, L. Azzopardi, and S. Geva, “Integrating the framing of clinical questions via PICO into the retrieval of medical literature for systematic reviews,” presented at the International Conference on Information and Knowledge Management, Proceedings, 2017, pp. 2291–2294. doi: 10.1145/3132847.3133080.

K. L. Lane and R. J. Kettler, “Literature Review, Questions, and Hypotheses,” in Research Methodologies of School Psychology: Critical Skills, 2019, pp. 24–41. doi: 10.4324/9781315724072-2.

M. Saputra, P. I. Santosa, and A. E. Permanasari, “Consumer Behaviour and Acceptance in Fintech Adoption: A Systematic Literature Review,” Acta Inform. Pragensia, vol. 12, no. 2, pp. 468–489, 2023, doi: 10.18267/j.aip.222.

V. O. Trung Quang and A. Riewpaiboon, “A literature review of health economic evaluation: A case of vaccination on systematic review analysis,” Int. J. Pharm. Sci. Rev. Res., vol. 39, no. 2, pp. 300–308, 2016.

I. G. M. P. Suardana, I. B. M. H. A. Nugraha, D. G. A. P. Pemayun, I. B. I. Purnama, I. G. K. S. Budarsa, I. B. K. Sugirianta, dan A. A. N. G. Sapteka, "Rancang Bangun Sistem Pengukuran Kinerja Baterai pada Baggage Towing Tractor berbasis NodeMCU ESP8266 Aplikasi Android," Jurnal Teknologi Terpadu, vol. 8, no. 2, pp. 100–105, 2022.

H. Carter-Templeton et al., “Completeness of Systematic Reviews in Nursing Literature Based on PRISMA Reporting Guidelines,” Adv. Nurs. Sci., 2025, doi: 10.1097/ANS.0000000000000567.

S. Cicero, M. Guarascio, A. Guerrieri, and S. Mungari, “A Deep Anomaly Detection System for IoT-Based Smart Buildings,” Sensors, vol. 23, no. 23, p. 9331, 2023. [Online]. Available: https://doi.org/10.3390/s23239331.

H. Q. Al-Shammari, A. Q. Lawey, T. E. H. El-Gorashi, and J. M. H. Elmirghani, “Service Embedding in IoT Networks,” IEEE Access, vol. 8, pp. 2948–2962, 2020, doi: 10.1109/ACCESS.2019.2962271.

S. H. Alsamhi, F. Afghah, R. Sahal, A. Hawbani, M. A. A. Al-qaness, B. Lee, and M. Guizani, “Green Internet of Things using UAVs in B5G networks: A review of applications and strategies,” Ad Hoc Netw., vol. 117, p. 102505, 2021.

L. C. Souza, E. R. Neto, E. S. Lima, and A. C. Sodré Jr., “Optically-powered wireless sensor nodes towards industrial internet of things,” Sensors, vol. 22, no. 1, p. 57, 2021.

C.-W. Hsu, Y.-L. Hsu, and H.-Y. Wei, “Energy-efficient edge offloading in heterogeneous industrial IoT networks for factory of future,” IEEE Access, vol. 8, pp. 183035–183050, 2020.

R. Sekaran, A. K. Munnangi, S. Rajeyyagari, M. Ramachandran, and F. Al-Turjman, “Ant colony resource optimization for Industrial IoT and CPS,” Int. J. Intell. Syst., vol. 37, no. 12, pp. 10513–10532, 2022.

Oh, D. Lee, D. S. Lakew, and S. Cho, “DACODE: Distributed adaptive communication framework for energy efficient industrial IoT-based heterogeneous WSN,” ICT Express, vol. 9, no. 6, pp. 1085–1094, 2023.

P. Wang, K. Wang, D. Wang, and H. Liu, “The impact of manufacturing transformation in digital economy under artificial intelligence,” IEEE Access, 2024.

B. Genge, P. Haller, and C. Enăchescu, “Anomaly detection in aging industrial internet of things,” IEEE Access, vol. 7, pp. 74217–74230, 2019.

N. U. Hadi, B. Almessabi, and M. I. Khan, “Leveraging Industry 4.0 and Circular Open Innovation for Digital Sustainability: The Role of Circular Ambidexterity,” J. Open Innov. Technol. Mark. Complex., vol. 2025, p. 100545, 2025.

H. Yetis, M. Karakose, and N. Baygin, “Blockchain-based mass customization framework using optimized production management for industry 4.0 applications,” Eng. Sci. Technol. Int. J., vol. 36, p. 101151, 2022.

K. S. Bhandari and G. H. Cho, “An energy efficient routing approach for cloud-assisted green industrial IoT networks,” Sustainability, vol. 12, no. 18, p. 7358, 2020.

T. Kumar, E. Harjula, M. Ejaz, A. Manzoor, P. Porambage, I. Ahmad, M. Liyanage, A. Braeken, and M. Ylianttila, “BlockEdge: Blockchain-edge framework for industrial IoT networks,” IEEE Access, vol. 8, pp. 154166–154185, 2020.

K. Choudhary, G. S. Gaba, I. Butun, and P. Kumar, “MAKE-IT—A lightweight mutual authentication and key exchange protocol for Industrial Internet of Things,” Sensors, vol. 20, no. 18, p. 5166, 2020, doi: 10.3390/s20185166.

Unduhan

Diterbitkan

2025-07-31

Cara Mengutip

[1]
E. Suciana, M. H. Nasrullah, D. A. Christanto, D. Cahyadi, dan L. T. Giantri, “Pemanfaatan IoT untuk Efisiensi Energi pada Pabrik Pintar: Tantangan, Solusi dan Tren Teknologi”, j. teknologi terpadu, vol. 11, no. 1, hlm. 70–77, Jul 2025.

Terbitan

Bagian

Artikel